***********************************************************
* *
* H3C S7506E BOOTROM, Version 509 *
* *
***********************************************************
Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd.
Creation date : Jan 9 2009, 10:44:09
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size : 256MB
Mac Address : 002389294f70
Press Ctrl-B to enter Boot Menu... 1
Password:
缺省情况下，进入BootRom菜单的密码为空.
3 进入BootRom菜单后，请键入“7”，选择“跳过配置文件启动”功能，并在系统提示时输入“y”进行确认。
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9): 7
The current setting is running configuration file when reboot.
Are you sure to skip current configuration file when reboot? Yes or No(Y/N) y
Setting......done!
4 回到BootRom菜单后，输入“0”重新启动交换机。
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9): 0
^@System rebooting...
5 再次启动时，交换机会跳过配置文件，即跳过对控制台密码的配置，您可以直接登录交换机。
****************************************************************************
* Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
Configuration file is skipped.
User interface aux0 is available.
Press ENTER to get started.
<H3C>
6 进入命令行接口后，您可以使用display startup命令查看启动配置文件，并使用more命令查看该配置文件中的控制台密码配置。
<H3C> display startup
Current startup saved-configuration file: NULL
Next startup saved-configuration file: flash:/startup.cfg
<H3C> more startup.cfg
l 如果认证方式是Password方式，请关注配置文件中的以下部分，即配置控制台登录密码的配置命令。
配置密码为明文方式的显示效果：
#
user-interface aux 0
authentication-mode password
set authentication password simple test
配置密码为密文方式的显示效果：
#
user-interface aux 0
authentication-mode password
set authentication password cipher .]@USE=B,53Q=^Q`MAF4<1!!
